|
|
|
| |
|
|
|
|
|
JANA produces the most widely used solvent cut of the basic liquid resin in Xylene. Apart from this, JANA also produces a lower molecular weight resin which has better compatibility with the acrylics and alkyd-amino combinations. These are versatile in application and are very widely used, cured by primary polyamines, polyamides, amino resins, phenol-formaldehyde hardeners. They also provide improved flexibility to the coatings.
|
|
|
Araldite® |
Solids content %* |
Epoxide Index Eq/kg |
Epoxide equi-valent g/Eq |
Viscosity 25°C (ISO 93718) mPas |
Soft-ening point (DIN S1 920 °C) |
Remarks |
|
80±1 |
3.10-3.40 |
234-258 |
600-850 |
|
Similar to araldite GZ 7071X75 but lower molecular weight, therefore better compatibility with acrylics and alkyd-amino combinations, in order to improve adhesion and chemical resistance.
|
|
75±1 |
1.42-1.67 |
600-700 |
4500-9000 |
|
Type 1 - epoxy resin solution for general purpose coatings and for formulating maintenance coatings as primer and topcoat. |
|
75±1 |
1.49-1.67 |
600-670 |
7000-10000 |
|
Type 1 - epoxy resin solution for cold curing (2-pack) lacquers formulated as primers or topcoat for melal and concrete substrates with excellent adhesion and corrosion resistance. |
|
100 |
1.89-2.22 |
450-530 |
200-250* |
77-82 |
Unmodified type 1- epoxy resin in combination with amine hardeners to formulate corrosion resistance primer and topcoats. Resin has tendency to agglomerate at higher storage temperature. |
|
100 |
1.43-1.67 |
600-670 |
280-340* |
82-90 |
Unmodified type 1- epoxy resin with slightly higher melting range than Araldite® GT 7071, and therefore fewer tendencies to agglomerate at high storage temperatures compared with type-1 resin. Drying time is somewhat shorter and flexibility higher, but solids content is lower. |
Araldite® is a registered Trademark of Huntsman
Razeen® |
Solid content %* |
Epoxide Index Eq/kg |
Epoxide equi-valent g/Eq |
Viscosity 25°C (ISO 93718) mPas |
Soft-ening point (DIN S1 920 °C) |
Remarks |
|
80±1 |
3.87-4.27 |
234-258 |
600-850 |
|
Similar to Razeen® SL4171X75 but lower molecular weight , therefore better compatibility with acrylics and alkyd-amino combinations, in order to improve adhesion and chemical resistance |
|
75±1 |
1.49-167 |
600-670 |
7000-10000 |
|
Type 1- epoxy resin solution for cold curing (2-pack) lacquers formulated as primers or topcoat for metal and concrete substrates with excellent adhesion and corrosion resistance. |
|
175±1 |
1.42-1.67 |
600-700 |
550-700 |
|
Type 1- epoxy resin solution for general purpose coatings and for formulating maintenance coatings as primer and topcoat. |
|
100 |
1.89-2.22 |
450-530 |
200-250* |
77-82 |
Unmodified type 1- epoxy resin in combination with amine hardeners to formulate corrosion resistance primer and topcoats. Resin has tendency to agglomerate at higher storage temperature |
|
100 |
1.43-1.67 |
600-700 |
280-340* |
82-90 |
Unmodified type 1- epoxy resin with slightly higher melting range than Razeen®SR 5071, and therefore fewer tendencies to agglomerate at high storage temperatures compared with type-1 resin. Drying time is shorter and flexibility higher, but solid content is lower. |
*40% Solution in butyl carbitol ** Mettler Toledo (Type FP 90)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
