Solution

Solution Epoxy Resins

Jana produces a variety of solvent diluted resins, usually in xylene. Apart from this, JANA also produces a lower molecular weight resin which has better compatibility with the acrylics and alkyd-amino combinations. These are versatile in application and are very widely used, cured by primary polyamines, polyamides, amino resins and phenol-formaldehyde hardeners. They also provide improved flexibility to the coatings.

Razeen® Solid content ±1 Epoxide Index (IE) Eq/kg Epoxide equi-valent Weight (EEW) G/Eq Viscosity 25°C (ISO 12058-1) mPas Remarks
SL4071X75 75% 1.42-1.67 600-700 5000-10000 Type 1 solution for higher solids coatings for metal, concrete, maintenance coatings, primers and finish coats and floors. Good corrosion resistance and adhesion.
SL4171X75 75% 1.49-1.67 600-670 8000-12000 Type 1 solution for general purpose coatings, maintenance coatings, primers, finish coats and flooring.
SL4072X75 75% 1.43-167 600-700 20000-50000 Type 2 solution for general purpose coatings, maintenance coatings, primers, finish coats and flooring.
SL4280X80 80% 3.87-4.27* 234-258 625-1275 Lower molecular weight giving improved compatibility with acrylics and alkyd-amino systems for improved chemical resistance.
SL4150X90 90% 4.17-5.00* 200-240* 265-1275 Lower molecular weight giving improved compatibility with acrylics and alkyd-amino systems for improved chemical resistance.
SL2290X90 90% 3.57-4.00 230-280 2000-5000 Modified low molecular BPA based Epoxy suitable for anti corrosive primers and high solids coatings. Colour is more yellow than unmodified grades.
SL6071X75 74-76% 1.6-1.8 555-625 5500-7500 Type 1 epoxy solution for metal, concrete, maintenance coatings, primers, finish c oats and floors. Good corrosion resistance and adhesion with higher pigment loadings possible than SL 4171 X 75. Ideal for fabrication shops and higher solids compliance.
SL 4910 PMA 50 49-51% 0.170–0.210 4760–5880 10000–15000 Type 9 solid resin based on Bisphenol A as solvent cut 50 % in PMA.
For can and coil coatings with improved mechanical properties, may also be used for ambient cure epoxy polyurethanes when cured with polyisocyanates to give excellent corrosion resistance and thin film weldable primers.
Araldite® Solid content ±1 Epoxide Index (IE) Eq/kg Epoxide equi-valent Weight (EEW) G/Eq Viscosity 25°C (ISO 12058-1) mPas Remarks
GZ471X75 75% 1.42-1.67 600-700 5000-10000 Type 1 solution for higher solids coatings for metal, concrete, maintenance coatings, primers and finish coats and floors. Good corrosion resistance and adhesion.
GZ7071X75 75% 1.49-1.67 600-670 8000-12000 Type 1 solution for general purpose coatings, maintenance coatings, primers, finish coats and flooring.

GZ 280X80
80% 3.87-4.27* 234-258 625-1275 Lower molecular weight giving improved compatibility with acrylics and alkyd-amino systems for improved chemical resistance.

*On 100% Solid basis
Araldite® is a registered Trademark of Huntsman