Solid

Solid Epoxy Resin

Powder coatings deliver solutions to many of the environmental problems associated with VOC’s and Environmentally harmful chemicals. Globally there has been a tremendous amount of work in this area including thin film anticorrosive primers using special pigments to achieve results in many cases superior to liquid paint. Functional powders continue to save the world billions of dollars in this way be providing long life corrosion protection and protecting the environment as manufacturers land consumers look for ever increasing life cycles for their products. Jana is at the forefront of these technologies.

Razeen® Epoxide Index Eq/Kg Epoxide equivalent g/Eq Viscosity 25°C ( ISO 12058-1) mPas* Softening Point °C DIN 51920** Remarks
SR 5061 2.00–2.22 450-500 160-250 77-82 Unmodified type 1 – typically used to formulate anti corrosive primers and finishes with tighter spec for pre preg applications. May agglomerate if stored at elevated temperature.
SR 5062 1.667-1.887 530–600 250–340 80-85 Type 1 ½ better anti sintering than SR 5071. Same applications as SR 5061.
SR 5071 – Fused 1.89-2.22 450-530 200-500 77-82 Unmodified type 1 – typically used to formulate, prepregs, composites, anti corrosive primers and finishes.
SR 5071 Flake 1.89-2.22 450-530 200-500 77-82 Unmodified type 1 – typically used to formulate anti corrosive primers and finishes. May agglomerate if stored at elevated temperature.
SR 5072 1.43-1.67 600-700 280-340 82-90 Type 2 – typically used to formulate solvent based anti corrosive primers and finishes and improved flow in powder coatings.
SR 5013 1.38-1.54 650-725 370-4901 85-92 3½ type with good gloss and flow, suitable for general purpose and hybrids with good gloss.
SR 5004 1.33-1.40 714-752 500-600 95-106 3½ type with good gloss and flow, suitable for general purpose and hybrids with good gloss
SR 5014 1.29-1.38 725-775 500-650 2 ~90 3½ type with good gloss and flow, suitable for general purpose and hybrids with good gloss.
SR 5014NI 1.29-1.38 725-775 500-650 2 ~90 Specially designed for thin film powders (25-40 microns). 3½ type with good gloss and flow, suitable for general purpose and hybrids with good gloss.
SR 5034 1.30–1.45 690–770 350-500 85-92 Master batch with 5 % flow agent for hybrids and powder coatings. Decorative coatings. May agglomerate if not stored in cool conditions.
SR 5184 1.12-1.20 835-895 550-700 2 99-105 Type 4 for Epoxy ester production and powder coatings with good corrosion resistance and edge cover.
SR 5074 0.85-1.07 935-1175 900-1200 3 97-110 5½ type for functional powders with good adhesion, flexibility, improved impact resistance and edge cover
SR 5084 1.117-1.200 833-895 550-700 3 99-105 Exhibits a high and uniform rate of esterification, and when
combined with various fatty acids, is highly suitable for the production of epoxy esters.
Such esters can be formulated into vehicles for a wide range of coating applications.
SR 5143 1.51-1.61 620-660 270-375 3 90-96 Type 2½ based on solid resin containing flow agent. Designed for the preparation of polyester-rich hydrid powder coatings.
SR 5174 1.30-1.45 690-770 350-500 4 85-95 Master batch with 5% flow agent for improved flow and easy production processing
SR 5334 1.31-1.42 704-763 230-320 ~87 Flow agent modifed type 3 resin, recommended for hybrids. Excellent flow properties.
SR 5274 1.15-1.35 740-870 350-550 85-95 Master batch with 10% flow agent for improved flow and easy production processing.
SR 5284 1.05-1.11 900-950 500-700 98-105 Master batch with 0.5% flow agent for improved flow and easy production processing.


Araldite® Epoxide Index Eq/Kg Epoxide equivalent g/Eq Viscosity 25°C ( ISO 93718) mPas* Softening Point °C DIN 51920** Remarks
GT 7071 1.89-2.22 450-530 200-500 77-82 Unmodified type 1 – typically used to formulate anti corrosive primers and finishes. May agglomerate if stored at elevated temperature.
GT 7072 1.43-1.67 600-700 280-340 82-90 Type 2 – typically used to formulate solvent based anti corrosive primers and finishes and improved flow in powder coatings.
GT 7013 1.38-1.54 650-725 370-4901 85-92 3½ type with good gloss and flow, suitable for general purpose and hybrids with good gloss.
GT 7004 1.33-1.40 714-752 500-600 95-106 3½ type with good gloss and flow, suitable for general purpose and hybrids with good gloss
GT 7014 1.29-1.38 725-775 500-650 2 ~90 3½ type with good gloss and flow, suitable for general purpose and hybrids with good gloss.
GT 6084 1.12-1.20 835-895 550-700 2 99-105 Type 4 for Epoxy ester production and powder coatings with good corrosion resistance and edge cover.
GT 7074 0.85-1.07 935-1175 900-1200 3 97-110 5½ type for functional powders with good adhesion, flexibility, improved impact resistance and edge cover
GT 6750 1.31-1.42 704-763 230-320 ~87 Flow agent modifed type 3 resin, recommended for hybrids. Excellent flow properties.
GT 2874 1.15-1.35 740-870 350-550 85-95 Master batch with 10% flow agent for improved flow and easy production processing.

** Mettler Toledo (type FP90)
1Cone and plate at 150°C (2200-3200 mPas)

2Cone and plate at 150°C (3100-4700 mPas)
3Cone and plate at 175°C (3000-6000 mPas)